MIL-DTL-82114C(MC)
4.3. First article inspection. When first article is required,
inspection shall be made of a completely fabricated coat front
for conformance to all provisions of this specification.
4.4. Conformance inspection.
4.4.1 Testing of components. Testing of components shall be
made in accordance with subsidiary specifications and standards
to the extent applicable, except that this specification shall
govern in the event of conflict. In addition to testing
provisions contained in subsidiary specifications and standards,
testing shall be performed on components in Table II for
characteristics noted. When the data in the "Determinations per
sample unit" and the "Results reported as" columns are not
specified in Table II, they shall be as required by the
referenced test method. The method of testing shall be as
specified in FED-STD-191, wherever applicable.
4.4.1.1. Sampling for testing. Unless otherwise specified in
subsidiary specifications, sampling shall be in accordance with
the following. The lot shall be unacceptable if one or more
sample units fail to meet any test requirements specified. The
sample unit for testing the haircloth shall be 1 yard full width.
The sample size shall be as follows:
Lot size
Sample size
800 or less
2
801 to 22,000 inclusive
3
22,001 and over
5
9
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business