MIL-DTL-82114C(MC)
ITEM
PATTERN NOMENCLATURE
NO. OF CUT PARTS
Material:
Basic
1
Body part
2
2
Shoulder dart stay
2
3
Waist dart stay
2
Material:
Haircloth
4
Chest piece
2
5
Top front corner reinforcement
2
Material:
Felt or flannel
6
Chest padding
2
Material:
Cloth, twill, polyester/cotton
Top front corner reinforcement and
2
7
chest piece front edge covering
2
8
Chest piece bottom edge covering
3.6. Construction.
3.6.1 Manufacturing requirements. The coat fronts shall be
manufactured in accordance with the operations and the stitch
type specified in Table I. The contractor is not required to
follow the exact sequence of operations as listed in Table I but
all operations specified shall be used to manufacture the coat
fronts.
3.6.1.1. Stitches and stitchings. The stitch type specified in
Table I shall conform to FED-STD-751. The number of stitches per
inch as specified in Table I indicates the minimum and maximum
number permitted.
3.6.1.2. Pressing. Steam shrinkage and dry pressing operations
specified in Table III shall be performed on steam pressing
machines shaped for right and left fronts.
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business