MIL-DTL-82114C(MC)
TABLE I.
Manufacturing requirements - Continued.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
Make coat fronts.
3
(cont'd)
d. Place the polyester/cotton
304
FSa-1
4-8
70/2
70/2
covering over bottom edge of chest
or
piece and stitch both edges of cover
LSa-1
to fronts.
e. Steam shrink fronts and press dry
to conform to shape of body.
f. Pair one right front with one
left front of the same size.
4
Labels.
a. Each finished coat front shall
have the identification and size
labels applied as indicated (see
3.3.6) on the respective figures.
3.7. Workmanship. The coat front shall conform to the quality
and grade of product established by this specification.
3.8. Recycled, recovered, or environmentally preferable
materials. Recycled, recovered, or environmentally preferable
materials should be used to the maximum extent possible provided
that the material meets or exceeds the operational and
maintenance requirements, and promotes economically advantageous
life cycle costs.
4.
VERIFICATION
4.1. Classification of inspection. The inspection requirements
specified herein are classified as follows:
a.
First article inspection (see 4.3).
b.
Conformance inspection (see 4.4).
4.2. Inspection conditions. Unless otherwise specified, all
inspections shall be performed in accordance with the provisions
set forth in ANSI/ASQC Z1.4.
8
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business