MIL-DTL-82114C(MC)
Classification
Examine
Defects
Major
Minor
A
B
Cutting
a. Any component part not cut in
202
accordance with directional
lines indicated on pattern or in
accordance with specification
requirements.
Pressing
a. Omitted on one or both
105
fronts, or not pressed to
conform to shape of body.
Seams and
a. Part of front caught in an
106
stitching
unrelated operation or
stitching.
b. Any part badly pleated or
203
puckered in stitching.
Stitches
a. More than 1 inch in length in
204
missing or
one or more places.
broken
Seam or stitch
a. Wrong seam or stitch type.
107
type
Stitch tension
a. Loose tension resulting in a
205
loose seam on major portion of
seam.
b. Tight tension on major
206
portion of seam. (Stitches break
when normal strain is applied to
seam or stitching.)
NOTE:
Puckering is an indication of tight tension. When
puckering is evident, the seam shall be tested by
exerting pull on lengthwise direction of seam.
Stitches per
a. Less than minimum or more
207
inch
than maximum specified. (To be
scored only when condition
exists on major portion of
seam.)
Size label
a. Missing, incorrect or
208
illegible on one or both fronts.
b. Not located on lower end of
301
each left and right front.
11
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business