MIL-DTL-82114C(MC)
3.3.6.1. Identification. The identification label shall conform
to type IV, class 1 of DDD-L-20, except that the characters of
the inscription shall be not less than 1/4 inch in height, and
shall be applied directly above the size label.
3.3.6.2. Size. The size label shall conform to type IV, class 2
of DDD-L-20, except that the characters of the inscription shall
not be less than 1/2 inch in height and shall be applied to the
bottom end of each front. The size marking shall include the
numerical designation followed by S for Short, R for Regular, L
for Long, and XL for Extra Long. Each coat front shall be marked
to indicate the left front and the right front preceding the size
designation with the letters LT for left and RT for right as
shown in the following examples:
LT 37-38-39R
RT 37-38-39L
3.4. Design. The coat fronts shall be as shown in Figures 1
through 4. Classes 1, 2, 3 and 4 are designed for coats with
stand-up collars worn by the U.S. Marine Corps Band, and Drum and
Bugle Corps and Ceremonial personnel.
3.5. Patterns. Standard patterns will be furnished to the
contractor by the Government. The standard patterns shall not be
altered in any way and shall be used only as a guide for cutting
the contractor's working patterns. The contractor's working
patterns shall be identical to the standard patterns. Standard
patterns show size and directional lines for cutting, and are
marked or notched for proper placement and assembly of component
parts.
3.5.1 List of pattern parts. The coat fronts shall be cut from
the specified materials in accordance with the number of pattern
parts indicated.
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business