MIL-DTL-81736B(AS)
3.5.2.2 Marking. Each reel shall be durably and legibly marked as follows:
TAPE, TEXTILE, NYLON, LANDBASED ARRESTING GEAR, 8-INCH
MIL-DTL-81736B(AS)
NAEC Part No.
Stock No.
Manufacturer's Identification Number for the Material Contract or Order No.
Date of Manufacture
Name of Contractor
Name of Manufacturer (if not the same as contractor)
3.5.2.3 Reel manufacture. The reel shall be manufactured as shown on NAEC drawing
508306. NAEC assigns new part numbers to Drawing 508306 for lengths not specified on the
applicable NAEC Drawing 506733, 613516, or 510534.
3.6 Identification.
3.6.1 Manufacturer's identification. The binder wrap shall have at the center of the tape,
two ends dyed to match the shade assigned to that manufacturer in accordance with
MIL-STD-1480. A manufacturer not listed in MIL-STD-1480 shall apply for assignment of
color coding (see 6.2e and 6.4). The colorfastness of this yarn shall be rated as "Fair" or "Good"
when tested as specified in 4.5.
3.7 Fiber identification. Each roll of tape shall be labeled, ticketed, or invoiced for fiber
content in accordance with 16 CFR Part 303.
3.8 Resin treatment of tape. The tape shall be impregnated with resin Spraylat TR-5418-3
or equivalent as approved by the engineering authority (see 6.8), containing 3 parts per hundred
(PHR) carbon black (based on 100 parts resin) to be used for pigmentation and sunlight
protection. The resin shall be applied from water dispersion, dried and cured to form a firm,
adherent and even deposit or coating on the yarns of the tapes. A verification procedure shall be
established to prohibit a tape temperature of greater than 300 ºF at any point during the drying
process. Once established, variation from this procedure shall require re-establishment of the
verification procedure.
3.8.1 Extractable matter. The extractable matter from the resin treated webbing shall be not
less than 4 and shall be not greater than 8.5 percent by weight.
3.9 Workmanship. The finished tape shall be uniform in quality, free from foreign matter
and irregular defects that can adversely affect usage or durability.
9
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business