MIL-DTL-81736B(AS)
TABLE IV. Classification of defects.
DEFECTS
DESCRIPTION
CRITICAL
MAJOR
MINOR
Abrasion marks
Resulting in the rupture of yarns,
X
or in nap sufficient to obscure
the identity of any yarn
exceeding 10 percent of width,
or one inch in length.
Broken or missing end
Two or more regardless of
X
length of a single end exceeding
6 inches in length.
Single end under 6 inches but
X
exceeding ¼ inch.
Broken or missing
Two or more regardless of
X
pick
extent. NOTE: The filling tie-
in or joining shall not be
construed as a defect of any
nature.
Coarse or light filling
Resulting in visible difference
X
bar
in stiffness or thickness of tape
and extending for more than ¼
inch or less in the length
direction.
Twist or distortion
Tape will not lay flat upon
X
application of manual pressure
due to twist or distortion.
Cut, hole, or tear
Any cut, hole, or tear.
X
Drop-ply
Clearly visible on more than two
X
ends within the same length
and exceeding over 9 linear
inches or more.
Edge loop
Forming clearly visible filling
X
loops, or edges tied loosely to
body of webbing for 2 linear
inches or more.
17
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business