MIL-DTL-81736B(AS)
4.
VERIFICATION
4.1 Classification of inspections. The inspection requirements specified herein are
classified as conformance inspection (see 4.2).
4.2 Conformance inspection. Conformance inspections shall consist of all the visual
examinations and tests specified in 4.5 through 4.6.4.2 (see 6.7).
4.3 Sampling for conformance inspection. Sampling for conformance inspection shall be
determined in accordance with 4.3.1 through 4.3.4.1 and as specified in table III.
4.3.1 Sampling plan A. Tests shall be conducted on every production tape length.
4.3.2 Sampling plan B. Tests shall be conducted on one sample for each continuous loom
run.
4.3.3 Sampling plan C. Tests shall be conducted on samples from each production lot or
10,000 pounds of yarn used in the manufacture of each arresting tape, whichever is less.
4.3.4 Sampling plan D. For this inspection, sampling shall be conducted in accordance with
4.3.4.1.
4.3.4.1 Inspection levels. The inspection levels for sampling plan D shall be as follows:
a. Yard-by-yard. A one yard unit of each production tape shall be inspected as specified in
4.6.4.1.
b. Overall. Each production tape length shall be examined for the defects specified in
4.6.4.2.
4.3.5 Sample plan E-Tape. A sample of each raw, untreated tape shall pass a minimum
tensile test of 150,000 lbs. If a sample exceeds 150,000 lbs, the test may be stopped at 153,000
lbs tension in lieu of taking a sample to complete destruction. Each sample tested shall relate
back to a tape serial number (see 6.2f and 6.9).
4.3.6 Sample plan E-Sewn loop production testing. A randomly selected tape from the
finished production lot shall be used for production lot testing of the sewn loops in accordance
with NAEL (SI) MISC NO. 08462, Section 4.2.4.
4.4 Test conditions and preparation. Unless otherwise specified in the detailed test methods
herein, the physical tests contained in this specification shall be conducted in an atmosphere
10
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business