MIL-DTL-14656B (ARMY)
THE INSTITUTE OF HERALDRY DRAWINGS
B-6-6 - Belt Buckle and Catch, Ceremonial (Ep)
B-6-6A - Belt Buckle & Catch, Ceremonial (Enlisted), Alternate
Assembly & Details
B-6-32 - Belt Buckle and Catch, U.S. Army Ceremonial, Officers
(The metal chip set and drawings above should be obtained from the procuring activity
or as directed by the contracting officer.)
2.3 Non-Government publications. The following documents form a part of this document to
the extent specified herein. Unless otherwise specified, the issues of the documents are those
cited in the in the solicitation or contract.
ASTM INTERNATIONAL
ASTM-B487 - Metal and Oxide Coating Thickness by Microscopical Examination of
a Cross Section, Measurement of
ASTM-E1282 - Standard Guide for Specifying the Chemical Compositions and
Selecting Sampling Practices and Quantitative Analysis Methods for Metals, Ores,
and Related Materials
(These standards can be obtained from ASTM International, 100 Barr Harbor Drive, West
Conshohocken, PA 19428-2959, website: www.astm.org.)
AMERICAN SOCIETY FOR QUALITY
ANSI/ASQC Z1.4 1993 - Sampling Procedures and Tables for Inspection by
Attributes
(Requests for copies of ANSI/ASQC Z1.4 should be addressed to the American Society for
Quality, 600 North Plankinton Avenue, Milwaukee, WI 53203-2914, website www.asq.org.
2.4 Order of precedence. In the event of a conflict between the text of this document and
the references cited herein, the text of' this document takes precedence. Nothing in this
document, however, supersedes applicable laws and regulations unless a specific exemption
has been obtained.
3. REQUIREMENTS
3.1 Unless otherwise specified (see 6.2), the contracting office shall furnish a standard
sample of the buckle which shall be used for matching color and finish only. Variation from
this specification may appear in the standard sample; however, in such cases the
specification shall govern.
3.2 First article. When specified (see 6.2 and 6.3), a sample shall be subjected to first
article inspection in accordance with 4.1.a.
3.3 Recycled, recovered, or environmentally preferable materials. Recycled,
recovered, or environmentally preferable materials should be used to the maximum extent
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business