MIL-DTL-20271E(MC)
Contract number and date:
Supplier's name:
Name of contracting agency:
3.7. Workmanship. The finished lace shall conform to the quality
of product established by this specification.
3.8. Recycled, recovered, or environmentally preferable
materials. Recycled, recovered, or environmentally preferable
materials should be used to the maximum extent possible provided
that the material meets or exceeds the operational and
maintenance requirements, and promotes economically advantageous
life cycle costs.
4.
VERIFICATION
4.1. Classification of inspection. The inspection requirements
specified herein are classified as follows:
a.
First article inspection (see 4.3).
b.
Conformance inspection (see 4.4).
4.2. Inspection conditions. Unless otherwise specified, all
inspections shall be performed in accordance with the provisions
set forth in ANSI/ASQC Z1.4..
4.3. First article inspection. When first article is required,
inspection shall be made of completely fabricated lace for all
provisions of this specification.
4.4. Conformance inspection.
4.4.1 Component and material testing. Testing of components
shall be in accordance with the applicable subsidiary
specifications and standards to the extent applicable, except
that this specification shall govern in the event of conflict.
The method of testing listed in Table II shall be as specified in
FED-STD-191, wherever applicable.
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business