A-A-55243A
4. REGULATORY REQUIREMENTS. The offeror/contractor is encouraged to use
recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of
the Federal acquisition Regulation (FAR).
5. PRODUCT CONFORMANCE PROVISIONS.
5.1 Product Conformance. The contractor shall certify that the product offered meets the salient
characteristics of this description and that the product conforms to the producer's own drawings,
specifications, standards and quality assurance practices and be the same product offered for sale
in the commercial market place. The Government reserves the right to require proof of such
conformance prior to the first delivery and thereafter, as may be otherwise provided for, under
the provisions of the contract. Reliance on contractor quality assurance systems shall not relieve
the contractor of the responsibility of ensuring that all products or supplies submitted to the
Government for acceptance comply with all requirements of the contract.
6. PACKAGING. Preservation, packing, and marking shall be as specified in the contract
or order.
7. NOTES.
7.1 Source of Documents.
7.1.1 Copies of Military and Federal documents are available online at
https://assist.daps.dla.mil/quicksearch/ from the Standardization Documents Order Desk,
700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5092.
7.1.2 ASTM Standards are available online at www.astm.org or from the ASTM International,
100 Barr Harbor Drive, West Conshohocken, PA 19426-2959.)
7.1.3 AATCC Standards are available on line at www.aatcc.org or from the American
Association of Textile Chemists and Colorists, P.O. Box 12215, Research Triangle Park, NC
27709-2215.
7.2 Certificate of Compliance. When certificates of compliance are submitted, the government
reserves the right to inspect such items to determine the validity of the certification.
7.3 Ordering data. The contract or order should specify the following:
a.
CID document number and revision.
b.
Type required.
c.
Color of tape required.
d.
When length of rolls is other than specified.
e.
Product conformance provisions.
f.
Packaging requirements.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business