[INCH-POUND]
A-A-52067
March 13, 1990
COMMERCIAL ITEM DESCRIPTION
BINDING, TEXTILE, COTTON, BIAS-CUT
The General Services Administration has authorized the use of this Commercial Item Description in preference to all types and classes of Federal Specification DDD-B-1199A.
1. SALIENT CHARACTERISTICS
1.1 Design and Construction. The cloth to be cut into binding shall be a plain weave cotton having 8 minimum weight of 3.0 ounces per square yard, and a minimum of 85 warp and 72 filling yarns per inch. The cloth shall be bleached or dyed as specified (see 4.2). The cloth selvages shall be removed and then the cloth shall be cut on an angle of 45 degrees ±5 degrees. The bias cut bindings shall then be joined together with 10 to 14 type 301 stitches per inch using seam type SSa-1 of FED-STD-751. The edges of the binding shall be treated with sizing to prevent raveling. The finished width of the binding shall be 1/2 ± 1/32 inch.
1.2 Put-up. The binding shall be rolled on tubes of the same width as the binding. The length on each roll shall be not less than 50 yards, nor more than 100 yards.
|
Beneficial comments, recommendations , additions, deletions, clarifications, etc. and any other data which may improve this document should be sent by letter to: Commander, U.S. Army Natick Research, Development, and Engineering Center, ATTN: STRNC-ESC, Natick, MA 01760-5014 |
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business